Manual Recording; Live Viewing; Manual Record - Q-See QC40198 User Manual

NAVIGATION AND CONTROLS

Manual Recording

4.2

Live Viewing

4.2.1
After you log in, the system is in live viewing mode. You can see system date, time and channel name. If you
want to change system date and time, you can refer to general settings (Main Menu->Setting->General). If you
want to modify the channel name, please refer to the display settings (Main Menu->Setting->Display)
Recording
1
status

Manual Record

4.2.2
Note: You have to have access rights to access to the Manual Record menu and a hard drive needs to be
properly installed.
Manual Record Menu
4.2.2.1
There are two ways for you to get to the manual record menu.

Right click mouse or in the main menu, Advanced->Manual Record.

In live viewing mode, push record button on the front panel or record button on the remote control.
Basic Operation
4.2.2.2
There are three status modes: schedule/manual/stop. Highlight icon"○" to select corresponding channel.

Manual: The highest priority. After manual setup, all selected channels will begin ordinary recording.

Schedule: Cameras record as you have set in recording setup (Main Menu->Setting->Schedule)

Stop: All channels stop recording.
Enable/Disable Record
4.2.2.3
Please check current channel status: "○" means it is not recording, "●" means it is re cording. You can use
mouse or direction keys to highlight channel number as illustrated in Figure 4-6.
Motion
2
detection
Figure 4-5
Figure 4-6
25 |
3
Video loss
P a g e
QC40198 User Manual
4
Camera lock