Cobalt Digital Inc BBG-1034-AUD-PRO Product Manual page 74

3
Table 3-1 BBG-1034-AUD-PRO Function Menu List — continued
Note:
For each Flex Mix input channel, its source should be considered and appropriately set. Unused input channels should
be set to the Silence selection.
• Flex Bus Input Channel Source/Bus
Assignment
• Gain / Mute Control
3-42
BBG-1034-AUD-PRO Function Menu List and Descriptions
Output Flex Mix – Provides a 16-channel mixer in which each of the
inputs can be mixed onto up to 16 independent output summing
nodes. The input sources are the device processed audio bus
channels. Each input channel has independent gain and mute
controls.
Output Flex Mix
Using the Source drop-down list, selects the audio input source to be
directed to the corresponding bus channel from the choices listed below.
• Silence
• Audio Bus Ch 1 thru Ch 16
• Tones (100 Hz thru 16 kHz)
• Downmix L or Downmix R
The Flex Bus drop-down selects the bus (A thru P) to which the input is
assigned to.
Provides relative gain (in dB) control and a channel Mute checkbox.
(-80 to +20 dB range in 0.1 dB steps; unity = 0.0 dB)
BBG-1034-AUD-PRO PRODUCT MANUAL BBG-1034-AUDPRO-OM (V1.1)