Cobalt Digital Inc BBG-1034-AUD-PRO Product Manual page 48

3
Table 3-1 BBG-1034-AUD-PRO Function Menu List — continued
Routing the DSP Audio Outputs On the Device
Again, depending on whether the DSP is positioned at the device input or output mixer, Audio DSP processed outputs are
available as follows:
•
DSP positioned at the Input Mixer makes its outputs available to the device Audio Bus Channels (as choices on each
Audio Bus Ch 1 thru Audio Bus Ch 16 drop-down using the Input Audio Routing tab).
•
DSP positioned at the Output Mixer makes its outputs available to the device Embedded, AES, and Analog Audio
channels (as choices on each output drop-downs using the Output Audio Routing tab).
Note: Dolby encoded audio can only be outputted on digital audio channels such as embedded or AES. However, DSP audio
processed to provide PCM outputs can also be outputted on analog audio output channels. These outputs will be processed
just like any other PCM handled by the device, and converted to analog by the device on-board audio DAC.
In the example here, since DSP A was set up to be positioned at the input mixer, its DSP outputs are routed to the Audio Bus
channels as shown below.
DSP A Upmix > RTLL 5.1 > 6 PCM Audio DSP A L thru
Audio DSP A Rs routed to card input Audio Bus
Channels Ch1 thru Ch 6, respectively.
The DSP outputs can be used for other internal card
routing or processes, or be available as PCM outputs
from the card via the card Audio Bus.
Emb 1/2
(PCM)
Like any other signals routed to the card Audio Bus,
these outputs are available on any of the card
embedded audio or AES outputs.
3-16
BBG-1034-AUD-PRO Function Menu List and Descriptions
Upmix 5.1 RTLL
BBG-1034-AUD-PRO PRODUCT MANUAL
(continued)
DSP A Upmix > RTLL 5.1 > 6 PCM + 2 Dolby Digital Encoded
Outputs Audio DSP A Dolby L and Audio DSP A Dolby R
routed to card input Audio Bus Channels Ch 7 and Ch 8,
respectively.
The DSP outputs can be used for other internal card routing or
processes, or be available as outputs from the card via the
card Audio Bus.
Route 5.1 PCM to Audio Bus
Channels 1-6
Dolby 5.1
Digital Encode
Route 5.1 Dolby D pair to
Audio Bus Channels 7/8
BBG-1034-AUDPRO-OM (V1.1)