Cobalt Digital Inc BBG-1034-AUD-PRO Product Manual page 45

Setup/Operating Instructions
Table 3-1 BBG-1034-AUD-PRO Function Menu List — continued
When a DSP pipeline is enabled for any function by checking any checkbox like that shown above, the sub-tabs for the
related DSP in the lower pane expose all the setup functions required for the selected processes. In this example, we'll
start with the Source Selection function since this is the first step in setting up a DSP.
After checkboxes enabling the desired processes are checked in the Audio DSP page upper pane, selecting the
respective DSP tab (Audio DSP A thru Audio DSP H) shows the pertinent setup tabs for the functions that are selected.
In this example, we've selected DSP processes using DSP pipeline Audio DSP A. Clicking the Audio DSP A tab exposes the
setup functions sub-tabs for the pipeline. Here, we will start with telling the DSP what inputs it will receive using the Source
Selection sub-tab.
With the Source Selection sub-tab opened, we now assign the card basic input channels that the processing chain will use
(in this example, sourcing from card basic inputs Emb Ch 1/2). Since all of the processes selected here reside in DSP A,
each process will forward its processed signal to the next enabled process in the DSP pipeline.
BBG-1034-AUDPRO-OM (V1.1)
BBG-1034-AUD-PRO Function Menu List and Descriptions
Audio DSP A select tab
BBG-1034-AUD-PRO PRODUCT MANUAL
(continued)
The Path Setup display shows the selected processes for
this DSP pipeline, as well as the flow/order of the
processing
3-13