Cobalt Digital Inc BBG-1034-AUD-PRO Product Manual page 50

3
Table 3-1 BBG-1034-AUD-PRO Function Menu List — continued
Note: This subsection of the Audio DSP presentation covers the specific controls and settings of the DSP enable setup pane,
signal routing to and from DSP blocks, and the specific DSP blocks themselves. Reading and understanding the
overview on the preceding pages is strongly recommended before proceeding to the descriptions below.
• Audio DSP Basic Setup Pane
(Upper Pane)
Clicking the Audio DSP tab opens the upper and lower panes of the Audio DSP page. In the upper pane, select desired pairs
A/B thru G/H of DSP pipelines as desired to facilitate DSP functions as needed.
• In each DSP function row (Dolby Decoder thru Dolby Digital Encoder 2.0), enable DSP function and apply it to a DSP pipeline
pair as desired by clicking the corresponding checkbox.
• When DSP functions are enabled In a DSP pipeline column, now position the DSP pipeline to be at the input or output mixer as
desired by checking the Input Mixer or Output Mixer button.
In this example, DSP A is set to enable Upmixer, Real Time Loudness Leveler 5.1, and Dolby Digital Encoder 5.1, with all
set to be positioned at the Input Mixer.
In this example DSP E is set to enable Dolby Decoder, with this set to be positioned at the Output Mixer.
• Unused DSP asset rows/columns can be left as-is with mixer selection being ignored.
• licenses available displays shows whether or not the DSP function is licensed for the card, and if so the number of licenses
available. As DSP functions are enabled, the available licenses is correspondingly decremented.
3-18
BBG-1034-AUD-PRO Function Menu List and Descriptions
(continued)
When the Audio DSP tab is opened, the upper pane allows basic, primary
setup of the DSP functions (blocks) such as selecting (enabling) available
DSP functions for each DSP pipeline.
These settings must be performed first, as these settings will enable
desired DSP functions and position the DSP assets at either the input
mixer or output mixer as desired. DSP-specific controls appear only
when the corresponding DSP function is enabled here.
BBG-1034-AUD-PRO PRODUCT MANUAL BBG-1034-AUDPRO-OM (V1.1)