Yakima HoldUp Plus2 Installation Instructions Manual page 6

AlWAYs use INTeGRATed lOcKING cABle WheN TRANsPORTING BIKes.
checK The
INsTAllATION
BefORe
dRIvING AWAY.
secuRe PIvOT ARMs WheN NOT IN use.
WheN NOT cARRYING BIKes AlWAYs fOld hOlduP uP.
Fold wheeltray
Slide the hook
against the rear
wheel cradle.
ReAd All WARNINGs ON NeXT PAGe BefORe dRIvING AWAY.
1034431D-6/21
• Push hooks agaInst tIres.
• rear wheels secured By ratchet straPs.
• Be sure all hardware Is secured accordIng to InstructIons.
• always secure PIvot arm when tray Is emPty.
inboard.
• Access locking cables at
the end of each pivot arm.
• Wrap locking cable
around bike frame.
• Insert the pin from the
pivot arm into hole at the
end of the locking cable.
Lock with key.
Tilt wheeltray
inboard.
Fold up HoldUp.
Rotate pivot
arm down.