Yakima HoldUp Plus2 Installation Instructions Manual page 5

sWING PIvOT ARM INTO PlAce.
Rotate the pivot arm up until the
hook rests on the bike tire 1" or
less from the brakes or the fork.
>
secuRe ReAR Wheel sTRAP.
Feed the strap through the spokes of wheel.
lOAd AddITIONAl BIKes.
• Refer to steps 11 through 17 to load additional bikes..
• Alternate bike direction with each additional bike
1034431D-5/21
Rotate the wheel
slightly, if necessary.
Failure to place
wheel hook
in the correct
position can cause
your bicycle to
eject, and cause
personal injury,
property damage,
or death.
TIGhTeN ReAR Wheel sTRAP.
• Insert the
strap end
through
the top of
the ratchet
buckle.
• Be sure the
pad rests on
the rim.
If you have bike to bike interference
when loading two or more bikes,
adjust trays as necessary to eliminate
interference between bikes.
4X
secuRe The hOOK.
Compress the
hook against
the wheel by
applying firm
pressure.
Move the ratchet tab up and
down to tighten the strap.
• Loosen the 4
tray bolts (do not
remove bolts).
• Slide the tray
left or right.
• Retighten the 4
tray bolts.
• Each tray can be
adjusted.