Controls And Switches; Power Switch/Volume Control - Standard Horizon HX600S User Manual

Hide thumbs Also See for HX600S:

Table of Contents

the battery downward and out from the transceiver.

4.1.4 USING THE CD-33 CHARGER CRADLE

Turn the transceiver off.

Insert the DC plug from the NC-88 into the DC jack on the CD-33 rear panel, then plug

the NC-88 into the AC line outlet.

Insert the HX600S (with the battery pack) into the CD-33; the antenna should be at the

left side when viewing the charger from the front.

If the HX600S is inserted correctly, the Red "CHARGING" indicator will glow. A

fully-discharged pack will be charged completely in approximately 10 hours.

5. CONTROLS AND SWITCHES

This section defines each control of the transceiver. For detailed operating instructions,

refer to section 6 "BASIC OPERATION." Refer to illustrations for the location of the

following controls, switches, and connections.

Turns the transceiver on and off, and adjusts the volume.

NOTE

10/39

FCC ID: K6630193X20

IC ID: 511B-30193X20

Operating Manual

Vertex Standard Co., Ltd.

Table of Contents

Show Quick Links

Table of Contents