5. CONTROLS AND INDICATORS
5.1 CONTROLS AND SWITCHES
This section defines each control of the transceiver. For detailed operating
instructions, refer to section "6. BASIC OPERATION". Refer to illustra-
tions for the location of the following controls, switches, and connections.
ANT Jack ( Top Panel )
The supplied CAT460 flexible an-
tenna is attached here.
MIC/SP Jack ( Top Panel )
The jack accepts the optional
SSM-14A Submersible Speaker/
Microphone, MH-73
er/Microphone, MH-57
Speaker/Microphone, SSM-64A
VOX Headset, or SSM-55A Ear-
piece/Microphone. When this jack
is used, the internal speaker and
microphone are disabled.
1) Do not allow the HX380
to become submerged
in water while the plastic cover
over the MIC/SP jack is removed.
2) Do not remove/install the op-
tional Speaker Microphone in a
hazardous location.
POWER Switch / VOLUME Con-
trol ( VOL )
Turns the transceiver on and off as well as adjusts the audio volume level.
Turn this knob clockwise to turn the radio on and increase the speakers au-
dio volume.
Turn fully counter-clockwise to turn the radio off.
PTT ( PUSH-TO-TALK ) Switch
When pushed activates the transmitter.
LCD Display
This display shows current operating conditions. Refer to page 19 for details.
Page 16
NOTE
Speak-
A4B
Mini
A4B
HX380