Cellular Interface Compatibility - Bosch B450 Installation And Operation Manual

8 en | System overview
1
10
Callout ￚ Description
1 ￚ Tamper switch connector
2 ￚ Bus address switch
3 ￚ MODE 2-pin jumper connector (for future use)
4 ￚ Bus address label
5 ￚ USB connector (Type A)
6 ￚ Heartbeat LED
7 ￚ RX LED (indicates packets received from the wireless network)
8 ￚ TX LED (indicates packets transmitted over the wireless network)
9 ￚ Terminal strip (to control panel)
10 ￚ Interconnect wiring connectors (to control panel or other compatible modules)
3.2

Cellular interface compatibility

The module supports multiple bus types. Refer to the table to determine the supported
applications and features by bus type.
IP Event Reporting
Remote Program
(RPS or A-link)
2017.10 | 09 | F.01U.300.740
9
TX RX
8
7
Function
Installation and Operation Guide
6
5 4
Installed Bus
Option/SDI
Y
Y
Conettix Plug-in Communicator Interfaces
2
3
SDI2 Details
Y TCP communication
is only supported on
SDI2
Y Requires Bosch
Cellular service or
other cellular network
access
Bosch Security Systems, Inc.