Caution In Using Pc Cards - Fujitsu LifeBook P1000 User Manual

Caution in using PC cards

Critical Point
• It may be required to turn off the power to the computer or to install a device driver when you
install a specific PC card. Check with the manual supplied with each PC card.
1 Install the PC card.
While pressing and holding down the PC card eject button, fully insert the PC card into the PC
card slot with the PC card product name facing upward.
PC card eject button
2 If the PC card is being installed for the first time, install any necessary driver.
Some PC cards require the installation of a driver. Check the manual supplied with each PC card
and install a driver if required.
A floppy disk or a CD may be required to install a driver.
3 Click the icon (Safety Remove Hardware) in the lower right corner of the screen
(notification area where a clock is displayed), and make sure that the name of the PC card
inserted is displayed correctly.
• If the name is displayed, the PC card is recognized correctly by the computer. Click a blank
space on the desktop.
• If no name is displayed, the PC card is not recognized correctly by the computer. Eject the
PC card, following steps 3 - 5 described in the "Ejecting a PC card" section, and install the
PC card again.
38
• Do not put your finger into the PC card slot when you install a PC
card, or you may be injured.
PC card slot
PC card