Table of Contents
Advertisement
2
Configure the E-mail button.
For using the E-mail button, you must have access to a POP3 Server. Contact your service
provider to determine if they support POP3. To configure the E-mail button please follow these
easy steps:
1
Click on Start.
2
Click on All Programs
3
Click on Fujitsu Quick Touch
4
Click on Postman
5
The Postman setting screen will appear.
6
Choose the type of connection: LAN or Dialup.
If LAN
: Click on LAN. Enter the POP3 Server name, your account name and password
for that account. Consult your Service provider if you do not know or unsure of
the information requested.
If Dial Up : Click on Dial Up. Choose the Dial up configuration (as previously set in Dial Up
Networking) you wish to retrieve mail from. Enter the POP3 Server name, your
account name and password for that account.
7
After all the information has been entered, test the connection by clicking on "Testing connection
with current setting". If an error occurs, check the settings and information on Dial Up Network
and Postman setting. If no error found, it will show connection successful.
When you have finished with E-mail button setup, you are ready to retrieve mail. When you press the
E-mail button, your system will establish connection with your provider, check for and retrieve new
mails, terminate the connection, and launch the mail application.
16
Advertisement
Table of Contents
