Table of Contents
Advertisement
1
Turn off the computer and disconnect the AC adapter from it.
2
Connect a commercially available display cable to the VGA Out connector.
Engage the connectors securely with attention paid to their orientations.
3
Insert the VGA Out connector in the external display connector on the rear panel of the
computer.
Engage the connectors securely with attention paid to their orientations.
External display connector
VGA Out connector
(The illustration varies depending on
the model and use conditions.)
4
Plug the other connector of the VGA Out connector into the CRT display.
For the way to connect the cable, refer to the manual for your CRT display.
5
Plug the power cable of the CRT display in a wall outlet and turn it on.
6
Connect the AC adapter to the computer, turn it on, and then switch displays.
If the Add New Hardware Wizard dialog box appears after you have connected the external display,
perform the following.
• If your external display came with a CD or a floppy disk containing files, install all necessary
files, following the instructions of the manual for the external display.
Critical Point
•
After an external display is connected to your computer, both the computer's LCD and the external
display may be activated simultaneously as the monitor of the computer.
•
To disconnect the VGA Out connector from the computer, pull it while pushing down the button
on the top of the connector.
42
Advertisement
Table of Contents
