Table of Contents
Advertisement
Charging
1
Connect the AC adapter.
With the connection of the AC adapter, charging starts. The battery charge indicator (
the remaining battery power indicator appear on the status indicator LCD.
2
Make sure that the battery charge indicator disappears and disconnect the AC adapter.
Critical Point
•
Charge the battery when you start using this computer after purchase or if you have not charged
it for more than 1 month.
•
Battery charging is complete when the battery charge indicator disappears and the leftmost
remaining battery power indicator changes from a blinking (
time for battery recharging to make sure that the battery is fully charged.
•
When the remaining battery power is still 90% or more, the unit does not start charging even if
the AC adapter is connected. Charging starts when the power is 89% or less.
•
When the computer is turned off, the indication on the status indicator LCD disappears soon
after charging is complete.
•
The battery charging capability deteriorates if the room temperature is too high or too low.
•
Battery charging might not begin if the battery temperature is too high after usage (the battery
charge indicator blinks in this case). Charging starts when the battery temperature falls after a
while.
Using the computer with the battery
Here is the explanation of how to use the computer with the battery.
1
Remove the AC adapter and press the SUS/RES switch.
After the battery fully charge, remove the AC adapter and power on your system using the SUS/
RES button or the On/Off switch. Now your system operate in Battery mode.
SUS/RES switch
) to a lit (
). Take sufficient
) and
19
Advertisement
Table of Contents
