Operation - Kärcher BRC 30/15 C User Manual

Operation

Vacuum loose dirt with a vacuum

cleaner prior to cleaning.
Swivel the pushing handle lock to

the outside, set the desired pushing
handle height and close the lock.
Insert the mains plug into the sock-

et.
CAUTION
Risk of damage. Check the object to be
cleaned prior to using the appliance in
an inconspicuous place for colour fast-
ness and water resistance.
DANGER
Risk of electric shock.
Do not let the mains cable come in con-
tact with the rotating brushes or rotat-
ing pads.
Set the appliance switch to normal

operation - start the suction turbine
and the brush drive.
Use the detergent solution key on

the push bow to spray on detergent
solution.
Run across the surface to be

cleaned in overlapping paths. Pull
the appliance backwards during
this procedure (do not push).
Emptying the waste Water tank
If the waste water tank is filled to 3/

4 of its capacity, switch the appli-
ance switch to "OFF".
Swivel the domelock to the front.

Lift the waste water tank off the ap-

pliance and empty it.
WARNING
Please observe the local provisions re-
garding the wastewater treatment.
Note:
If the waste water tank is full, dirty wa-
ter will flow back onto the carpet, as
soon as the appliance is switched off.
8
Operation with accessory tools
Only use accessories and spare parts
which have been approved by the
manufacturer. The exclusive use of
original accessories and original spare
parts ensures that the appliance can
be operated safely and trouble free.
Connect the provided adapter to

the detergent hose of the accessory
tools.
Pull the suction hose out of the

dome.
Insert the suction hose of the ac-

cessory tool into the dome instead
of the suction hose.
Connect the coupling of the deter-

gent hose on the appliance to the
detergent hose of the accessory
tool.
Set the appliance switch to opera-

tion with manual nozzle - the suc-
tion turbine will start.
Use the lever on the accessory tool

to spray on detergent solution.
Note:
When unplugging the accessory tools,
the adapter must be removed from the
appliance, so that the water output on
the appliance is closed.
Recommendation: Leave the adapter
on the hose of the accessory tool.
– 6
EN