Nfc Module - HP EliteBook 850 G5 Notebook PC Maintenance And Service Manual

NFC module

Description
NFC module (includes antenna and TouchPad foam)
Before removing the NFC module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the NFC module:
1. Disconnect the system board cable (1) and the NFC antenna (2) from the ZIF connectors on the NFC
module.
2. Use a tool to release the NFC module from the adhesive securing it to the computer (3), and then remove
the module from the computer (4).
Reverse the removal procedures to install the NFC module.
64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Bottom cover on page
Battery on page 50).
37).
Spare part number
L14385-001