Device Configuration; Turning On The Aquamap Automatically; System Settings; Viewing System Software Information - Garmin AQUAMAP 10x2 Series Owner's Manual

Device Configuration

Turning On the AQUAMAP Automatically

You can set the AQUAMAP to turn on automatically when the power is
applied. Otherwise, you must turn on the AQUAMAP by pressing .
Select Settings > System > Auto Power Up.
NOTE: When Auto Power Up is On, and the AQUAMAP is turned off using
, and power is removed and reapplied within less than two minutes, you
may need to press to restart the AQUAMAP.

System Settings

Select Settings > System.
Sounds and Display: Adjusts the display and audio settings.
GPS: Provides information about the GPS satellites and settings.
System Information: Provides information about the devices on the network
and the software version.
Station Information: Adjusts the setup of the station.
Auto Power Up: Controls what turns on automatically when power is applied.
Simulator: Turns the simulator on or off and allows you to set the time, date,
speed, and simulated location.

Viewing System Software Information

You can view the software version, the basemap version, all supplemental
map information (if applicable), the software version for an optional Garmin
radar (if applicable), and the unit ID number. You may need this information to
update the system software or to purchase additional map data information.
Select Settings > System > System Information > Software
Information.
AQUAMAP™ 10x2/12x2 SERIES
Viewing the Event Log
The event log shows a list of system events.
Select Settings > System > System Information > Event Log.

Station Settings

Select Settings > System > Station Information.
Change Station: Sets the entire station to a new set of defaults based on
the location of this station. You can also select to use this display as a
stand-alone, individual display, instead of grouping it with other displays to
make a station.
GRID™ Pairing: Allows you to pair a GRID™ remote input device with this
station.
Display Order: Sets the order of the displays, which is important when using
a GRID remote input device.
Autopilot Enabled: Allows you to control the autopilot from this device.
Reset Layouts: Restores the factory default view for the layouts in this
station.
Reset Stations: Restores the factory default layouts for all displays in the
station.

Preferences Settings

Select Settings > Preferences.
Units: Sets units of measure.
Language: Sets the on-screen text language.
Navigation: Sets navigation preferences.
Keyboard Layout: Arranges the keys on the on-screen keyboard.
Screenshot Capture: Allows the device to save images of the screen.
User Data Sharing: Allows you to share waypoints and routes over the
Garmin Marine Network. All AQUAMAPs that share waypoints and routes
87