Sonar Screen ................2 Status Icons ................2 Chart ................3 Locating the STRIKER Cast Device Using the Chart ....3 Marking a Waypoint on the Chart ..........3 Editing and Deleting Waypoints ..........3 Garmin Quickdraw™ Contours Mapping..... 3 Mapping a Body of Water Using the Garmin Quickdraw Contours Feature ................
Put the device in water, with the two pins in contact with You can fish with the device in various ways. the water, to turn on the STRIKER Cast device and prepare it • Cast and leave the device on a dedicated fishing rod so that to connect.
Flasher View problem. The flasher shows sonar information on a circular depth scale, indicating what is beneath the STRIKER Cast transducer. The Adjusting the Level of Detail flasher is organized as a ring that starts at the top and You can control the level of detail and noise shown on the sonar progresses clockwise.
Chart contours. From the STRIKER Cast app, select Chart. You can locate the STRIKER Cast device location using the chart in the STRIKER Cast app. This can be helpful when Select > Record. locating a lost device. As you fish with the STRIKER Cast device, a map is From the STRIKER Cast app, select Chart.
Standard USB wall outlet, computer Updating the STRIKER Cast Device Software port, or vehicle charger. Before you can update the STRIKER Cast software, the device Included tether length 5 m (16 ft.) must have a battery charge of 50% or higher.