Nmea 2000 Settings; Marine Network - Garmin AQUAMAP 10x2 Series Owner's Manual

Port Types: Sets the communication format for each NMEA 018 port.
Output Sentences: Configures NMEA 0183 output sentences.
Position Precision: Adjusts the number of digits to the right of the decimal
point for transmission of NMEA output.
XTE Precision: Adjusts the number of digits to the right of the decimal point
for NMEA crosstalk error output.
Waypoint IDs: Sets the device to transmit waypoint names or numbers via
NMEA 0183 while navigating. Using numbers may resolve compatibility
issues with older NMEA 0183 autopilots.
Defaults: Restores the NMEA 0183 settings to the original factory defaults.
Diagnostics: Displays NMEA 0183 diagnostic information.
Setting the Communication Format for Each NMEA 0183 Port
You can configure the communication format for each internal NMEA 0183
port when connecting your AQUAMAP to external NMEA 0183 devices, a
computer, or other Garmin devices.
1 Select Settings > Communications > NMEA 0183 Setup > Port Types.
2 Select an input or output port.
3 Select a format:
• To support the input or output of standard NMEA 0183 data, DSC, and
sonar NMEA input support for the DPT, MTW, and VHW sentences,
select NMEA Standard.
• To support the input or output of standard NMEA 0183 data for most
AIS receivers, select NMEA High Speed.
• To support the input or output of Garmin proprietary data for interfacing
with Garmin software, select Garmin.
4 Repeat steps 2–3 to configure additional input or output ports.
Configuring NMEA 0183 Output Sentences
You can enable and disable NMEA 0183 output sentences.
90
1 Select Settings > Communications > NMEA 0183 Setup > Output
Sentences.
2 Select an option.
3 Select one or more NMEA 0183 output sentences, and select BACK.
4 Repeat steps 2 and 3 to enable or disable additional output sentences.

NMEA 2000 Settings

Select Settings > Communications > NMEA 2000 Setup.
Device List: Displays the devices connected to the network.
Label Devices: Changes the labels for available connected devices.
Naming Devices and Sensors on the Network
You can name devices and sensors connected to the Garmin Marine Network
and the NMEA 2000 network.
1 Select Settings > Communications.
2 Select Marine Network or NMEA 2000 Setup > Device List.
3 Select a device from the list on the left.
4 Select Change Name.
5 Enter the name, and select Done.

Marine Network

The Marine Network allows you to share data from Garmin peripheral devices
with the AQUAMAP quickly and easily. You can connect the AQUAMAP to the
Marine Network to receive data from and share data with other devices and
AQUAMAPs that are compatible with the Marine Network.
Select Settings > Communications > Marine Network.
AQUAMAP™ 10x2/12x2 SERIES