Table of Contents
Advertisement
In-band management means that you connect remotely using the ES8508
IP address through the network. You can remotely connect with the
ES8508 Java applet web interface or a Telnet console and the CLI.
The following procedure uses a web browser to configure ES8508 features.
Refer to the RocketLinx ES8508 Series User Guide for other configuration
methods.
1.
If necessary, install the latest version of the Java Runtime
Environment, which is required to run the web management interface.
2.
Open a web browser and enter the IP address of the ES8508.
Click Run when Java prompts you to run the applet.
3.
Enter admin for both the user name and the password when
4.
prompted.
5.
Use the web interface to configure your device as needed for your
network.
You can use the help system or the RocketLinx ES8508 Series User Guide
for information about configuring RocketLinx ES8508 features.
COMTROL CUSTOMER SERVICE
You can use one of the following methods to contact Comtrol.
Contact Method
Support
Downloads
Website
Phone
Web Address or Phone Number
http://www.comtrol.com/support
ftp://ftp.comtrol.com/html/ES8508_main.htm
http://www.comtrol.com
+1 763.957.6000
7
Advertisement
Table of Contents
