Mercedes-Benz S-Class Coupe 2018 Operator's Manual page 400

398 Technical data
Do not alter the engine oil or oil filter in
#
order to achieve longer change intervals
than prescribed.
Do not use additives.
#
Have the engine oil changed after the
#
prescribed intervals.
Mercedes-Benz recommends that you have the
oil change carried out at a qualified specialist
workshop.
Further information on engine oils and oil filters:
in the Mercedes-Benz Specifications for
R
Operating Fluids at http://bevo.mercedes-
benz.com (by entering the designation)
in the Mercedes-Benz Specifications for
R
Operating Fluids in the Mercedes-Benz BeVo
app (by entering the designation)
at a qualified specialist workshop
R
Quality and capacity of engine oil
MB-Freigabe or MB-Approval
Model MB-Freigabe or MB-
S 560 229.52, 229.61
The following values refer to an oil change,
including the oil filter.
Capacity
Model
S 560 9.5 US qt (9.0 l)
Notes on brake fluid
Observe the notes on operating fluids
( page 395).
→
& WARNING Risk of an accident due to
vapor pockets forming in the brake sys‐
tem
The brake fluid constantly absorbs moisture
Approval
from the air. This lowers the boiling point of
the brake fluid. If the boiling point is too low,
vapor pockets may form in the brake system
when the brakes are applied hard.
This causes the braking effect to be
impaired.
Have the brake fluid renewed at the
Capacity
#
specified intervals.
Have the brake fluid regularly changed at a quali‐
fied specialist workshop.
Only use brake fluid approved by Mercedes-Benz
according to MB-Freigabe or MB-Approval 331.0.
Further information on brake fluid:
in the Mercedes-Benz Specifications for
R
Operating Fluids at http://bevo.mercedes-
benz.com
at a qualified specialist workshop
R