Table of Contents
Advertisement
144 Driving and parking
Check if the transmitter frequency of the
#
remote control has the frequency range of
280 to 868 MHz.
Radio equipment approval number:
NZLMUAHL5 (USA)
R
4112A-MUAHL5 (Canada)
R
Press and hold button 1,
2
#
wish to program.
Indicator lamp
4
flashes yellow.
%
It can take up to 20 seconds before the indi‐
cator lamp flashes yellow.
Release the previously pressed button.
#
Indicator lamp
4
continues to flash yellow.
Point remote control
5
at a distance of 1 in
#
(1 cm) to 3 in (8 cm) towards buttons 1,
or 3.
Press and hold button
6
of remote control
#
5
until:
Indicator lamp
4
lights up green contin‐
R
uously. Programming is complete.
Indicator lamp
4
flashes green. Pro‐
R
gramming was successful. Additionally,
synchronization of the rolling code with
the door system must also be carried out.
If indicator lamp
4
does not light up or flash
#
green: repeat the procedure.
Release all of the buttons.
#
or
3
that you
%
The remote control for the door drive is not
included in the scope of delivery of the
garage door opener.
Synchronizing the rolling code
Requirements:
The door system uses a rolling code.
R
The vehicle must be within range of the
R
garage door or door drive.
2
The vehicle as well as persons and objects
R
are located outside the range of movement
of the door.
Advertisement
Table of Contents
