Table of Contents
Advertisement
Incomplete digital map data
R
Changing direction overview
There are three phases when changing direction:
Preparation phase
R
If there is enough time between the changes
of direction, the multimedia system prepares
you for the upcoming change of direction. A
navigation announcement, e.g. "Prepare to
turn right", is issued.
The map appears in full-screen mode.
Announcement phase
R
The multimedia system announces the
upcoming change of direction, e.g. by
announcing "Turn right in 300 feet (100 m)".
The display is split into two parts. The map is
displayed on the left; on the right, there is a
detailed image of the junction or a 3D image
of the upcoming change of direction.
Change-of-direction phase
R
The multimedia system announces the immi‐
nent change of direction, e.g. by announcing
"Now turn right".
The display is split into two parts.
The vehicle has successfully changed direc‐
tion when the light-colored bar on the right
drops down to 0 feet (0 meters) and the cur‐
rent vehicle position symbol has reached the
highlighted change-of-direction point.
When the change of direction is complete,
the map appears in full-screen mode.
Multimedia system 263
%
Changes of direction are also shown in the
Instrument Display.
Lane recommendations overview
This display appears for multi-lane roads.
If the digital map contains the relevant data, the
multimedia system can display lane recommen‐
dations for the next two changes of direction.
Advertisement
Table of Contents
