Area Codes - Gigaset S450 User Manual

Gigaset S455 / USA EN / A31008-M1714-B101-1-19 / starting.fm / 28.3.06
S450
First Steps
¤
Set the date and the time, for example
to ensure the correct time of incoming
calls is recorded.
Setting the date and time
¤
To set the date and time, press the dis-
play key
§Time§
To change the time, open the input field
via:
¢ ¢
v Ð
Date/Time
¤
Change multiple line input:
Date:
Enter month, day and year in 6-digit
format.
Time:
Enter hours and minutes with 4 digits,
e.g. Q M 1 5 for 7:15 am.
If you have selected the 12-hour time for-
mat, use the display key
between am and pm.
Time mode:
Choose between 12 and 24-hour time
format.
Press the display key.
§Save§

Area codes

In order to call back a caller using the
incoming caller ID list (page 18), your
phone's area code ("local area code")
must be stored. If your phone is in a "mul-
tiple area code" area, the extra codes for
this area must also be stored.
Local Area Code
¢ ¢
v Ð
Base
Local Area Code
Select and press
~
Enter local area code.
Press the display key.
§Save§
a
Press and hold (idle status).
10
to open the input menu.
to switch
§am/pm§
.
§OK§
Extra Codes
¢ ¢
v Ð
Base
Extra Codes
Select and press
~
Enter extra code.
Press the display key.
§Save§
a
Press and hold (idle status).
Repeat the above steps until all extra
codes for your area have been entered. A
maximum of 5 extra codes can be stored.
Display in idle status
Once the phone is registered and the time
set, the idle display looks as shown here
(example).
Ð V
INT 1
06.03.06 07:15
INT Menu
Your phone is now ready to use.
.
§OK§