Alarm; Night Mode; Call Block - Panasonic KX-TGC380C Operating Instructions Manual

Alarm

An alarm sounds at the set time for 3 minutes
once or daily. Alarm can be set for each
handset.
1
MMENUN#720
2
MbN: Select the desired alarm option. a
MSELECTN
3
Enter the desired month and date. a
MOKN
4
Set the desired time.
5
*: Select "AM" or "PM". a MOKN
6
MbN: Select the desired alarm tone. a
MSELECTN
7
MSELECTN a MOFFN

Night mode

Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Important:
R If you have set the alarm, the alarm sounds
even if the night mode is turned on.
Turning night mode on/off
1
MMENUN#238
2
MbN: Select the desired setting. a
MSAVEN
3
Follow the directions on the display to
complete the operation.
Changing the start and end time
1
MMENUN#237
2
Follow the directions on the display to
complete the operation.
For assistance, visit www.panasonic.ca/english/support
TGC38x(en)_1204_ver011.pdf

Call block

This feature allows the unit to block calls when:
– the unit receives a call from a phone
– the unit receives a call without phone
When a call is received, the unit rings once
while caller information is being received. If
the caller's phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call. (Caller ID
subscribers only)
*1
Important:
R Blocked calls are logged in the caller list.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
n From the caller list:
1
2
3
4
5
6
7
19
Programming
number stored in the call block list as
unwanted ("Storing unwanted callers",
page 19).
number ("Blocking incoming calls that have
no phone number", page 20).
This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 20).
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
MCN CID
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
"Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 5.
MMENUN
MbN: "Save CID" a MSELECTN
MbN: "Call block" a MSELECTN
MbN: "Yes" a MSELECTN
Edit the phone number if necessary (24
digits max.).
*1
19
2015/12/04 16:50:48