Show Controllers Backplane Ethernet Location Multicast Groups - Cisco ASR 9000 Series Manual

Internal Ethernet Control Network Commands on the Cisco ASR 9000 Series Router

show controllers backplane ethernet location multicast groups

To display information about backplane interfaces that are in multicast groups in a particular location, use the
show controllers backplane ethernet location multicast groups command in EXEC mode.
show controllers backplane ethernet location multicast groups
Syntax Description
This command has no keywords or arguments.
Command Modes
EXEC
Command History
Release
Release 3.7.2
Usage Guidelines
Examples The following example shows the output from the show controllers backplane ethernet location multicast
groups command, which displays detailed information about the backplane interfaces.
RP/0/RSP0/CPU0:router# show controllers backplane ethernet location multicast groups
Intf
------------------------------------------------------------------------------
FastEthernet0_2_CPU0
OL-24762-01
Multicast
Name
0100.0000.0064
0100.0000.0065
0100.0000.0066
0100.0000.0068
0100.0000.006a
0100.0000.006c
0100.0000.006e
0100.0000.0071
0100.0000.2774
0100.0000.2775
0100.0000.2776
0100.0000.2778
0100.0000.277a
0100.0000.2782
0100.0000.278a
0100.0000.2796
0100.0000.2798
Cisco ASR 9000 Series Aggregation Services Router Interface and Hardware Component Command Reference
show controllers backplane ethernet location multicast groups
Modification
This command was introduced.
Client registered for this address
address Id
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Name
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
GSP
19