Yueming CMA1325 Owner's Manual page 45


Power supply switch of movement system: green indicator light is inside it, used to
control to power on the movement system.
The button indicator light indicates the power on status of current system as follow:

Green indicator light: the primary heat transport system and control system has
powered on (main contactor linking) when it lights (green light).

Red indicator light: laser power supply indicator, the laser has powered on when it
lights (red light).
Indicator light only indicates the power on status of controlled part; the
machine is not out of power completely.
Attention
Please check whether the indicator light all right, and dispose it.
CMA1625 is collocated the No.3 controller, the operation panel is shown as follow:
Ampere meter
Emergency stop button
Laser power supply switch
USB interface
The button position and function definition of the operation panel of CMA1625 is different
from CMA1325, definition follows:

Power on switch of system: power on the whole system, press this button, the control
system and movement system power on, the switch of laser power supply is activated.
At this moment, press the switch of laser power supply to power on the laser.

Power off switch of system: power off the whole system, press this button, the
machine power off.
Fig.3-18 Button indicator light
Fig.3-19
- 35 -
Control panel
Adjusting knob
of ampere
Power on switch
of system
Power off switch
of system