Fix the laser tube with proper force to avoid damage against it.
It is a must to keep the water inlet (light outlet end) at lower part of
the tube.
Attention
After fixation of the laser tube, connect the water inlet end with water protection to
water inlet at negative end of the laser tube, and connect another water inlet hose
reliably to water outlet with high pressure. Ensure the water inlet adown and the water
outlet up as shown in the figure below:
Water outlet
Light outlet
Reliable connection of each water hose is required to avoid leakage;
Keep water hose in good order free of twist for smooth water flow.
Attention
Finally, install the laser tube power cord with high voltage and earthing at the position
of two ends (as figure 3-7).
Upper cover part
Fig.3-6
Fixing laser tube
Negative end
Fig.3-7
- 27 -
High pressure end
Water inlet