Power supply: the master imputer power supply of the machine. They are generally
AC220V. However, the exported types differ from each other due to the countries
exported to;
Series No.: the unique number of each machine;
Manufacture Date: the date on which the machine is produced;
In addition, each device is attached with an independent ex-factory parameter list usually
stuck on the inner part of right end cover of the machine. The parameter lists are different from
each other due to the differences of type of machine and configured controller. The following is a
parameter list for CMA1325:
Item
Pulse/mm
Max. stroke (mm)
Control method
Max. speed (mm/s)
Max. acceleration (mm/s
Reset direction
Zero (limit) level (Note 1)
Power control signal
Energy regulation method
PWM frequency (Hz)
(Note 2)
Pre-voltage (V) (Note 2)
Focus (mm)
Space between two laser
heads (mm)
Note 1: level trigger signal; high level trigger is o, low level trigger is 1, and suspension is 1;
Type Ⅲ machine ex-factory parameter list
□A axis
□Z axis
2
)
-
+
-
1
1
1
√Laser head 1
□PWM □Frequency √Analog
√Dynamic energy
□Constant Energy
1.0
63.5
√Y axis
328.98
2500
P+D
300
3000
-
Algorism numerical value (240)
+
-
+
1
0
0
□PWM □Frequency □Analog
□Dynamic energy
□Constant Energy
- 11 -
√X axis
157.82
1300
P+D
400
16000
+
-
+
0
0
□Laser head 2