Reset The Adapter; Contact Lexmark - Lexmark N5 Getting Started

Reset the adapter

If you encounter problems during setup or later decide to
move your adapter to a different network, you may need to
reset the adapter.
To reset the adapter:
1 Verify all indicator lights are on (page 5).
2 Press the Reset button using a pen or pencil.
3 Verify the USB light goes out momentarily.

Contact Lexmark

Visit our Web site at www.lexmark.com to:
• Receive technical support.
• Register your adapter.
Other ways to contact our Customer Support Center:
• From the Lexmark Solution Center, click Contact
Information Customer Support.
• Insert the printer software CD that came with your
printer into your CD-ROM drive, and then click
Contact Lexmark
• Insert the Lexmark N5 Adapter Setup Utility software
CD into your CD-ROM drive, and then click Contact
Lexmark Technical Support.
31
Lexmark confidential until announced
Technical Support.
Getting Started