Reset The Printer Adapter; Contact Lexmark - Lexmark N5 Getting Started

Reset the printer adapter

If you encounter problems during setup or later decide to
move your printer adapter to a different network, you may
need to reset the printer adapter.
To reset the printer adapter:
1 Verify all indicator lights are on (page 5).
2 Using a pen or pencil, press the Reset button three
times within 5 seconds.
3 Verify the USB light goes out momentarily, blinks, and
then remains lit.
How Do I...?

Contact Lexmark

Visit our Web site at www.lexmark.com to:
• Receive customer support.
• Register your printer adapter.
Other ways to contact our Customer Support Center:
• If you have an inkjet printer, from the Lexmark Solution
Center, click Contact Information
• If you have an inkjet printer, insert the printer software
CD that came with your printer, and then click Contact
Lexmark Customer Support.
• Insert the Lexmark Printer Adapter Installation Software
CD, and then click Help
Support.
38
Customer Support.

Contact Lexmark

Customer