Lexmark N5 Getting Started page 14

Click Continue.
11
Select the network to which you want to connect
12
your printer.
Note: If the network to which you want to
connect your printer is the same network
to which your computer was connected,
you may want to refer to the values you
wrote down in step 7 on page 8.
Join the network
Setup your wireless printer adapter.
You are connected to the N5 adapter at address
Find the network that you wish to have this adapter join from the list below and
select connect.
SSID
John's
(ed: selection is
default
highlighted, do
home
not show N5)
If your adapter is not listed
If your network is not listed.
Exit
Manual Selection
Note: If your network is not listed, click Advanced
to manually select your network settings.
Click Connect.
11
4
00-20-00-00-0A-47
Mode Encryption Channel
Infrastructure None 8
Infrasturcture None 5
Infrastructure Yes 9
Connect
Back Advanced
If you do not have WEP security enabled for your
13
network, continue with step 15 on page 10.
If your network is secured, select the encryption
bit and enter the WEP Key on the Network
Security screen.
Network Security.
Enter WEP information
The network that you selected requires a security key.
WEP Key
Note: Key must be hexidecimal. Passphrases not supported
For more key information.
Click Continue.
14
9
Lexmark confidential until announced
40/64 bit 128 bit
Exit Back
Getting Started
6