Configure Your Lexmark Laser Printer - Lexmark N5 Getting Started

To set up other computers on your network, continue with the
following instructions:
1 Insert the printer software CD.
When the Lexmark printer software installation
2
screen appears, click Install or Install Now.
If the printer software was previously installed on
this computer, you are prompted to update the
existing driver or install another copy of the driver.
Select Install another copy of the driver only if
you plan to print to multiple printers of the same
model. For example, you might have a Lexmark
Z65 locally attached and another Lexmark Z65 on
your network. If you choose to Install another
copy of the driver, make sure you change your
printer selection whenever you want to print to the
network printer.
Continue with step 3 on page 12.
3
Getting Started
Step 10:
Configure your
Lexmark laser printer
Use the printer software to help configure your network laser
printer. If you have not already installed this software, locate
the CD that came with your printer now.
Choose a procedure from the following table to install your
printer software and configure your network printer.
Procedure
Laser 1
Laser 2
16
Lexmark confidential until announced
Printer software
previously installed?
No
Yes
Page
17
19