Page 1
N5 Wireless Adapter Getting Started September 2002 www.lexmark.com...
Page 2
Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe Marlow Bucks SL7 3RQ.
Page 3
Compliance is indicated by the following CE marking: A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950.
I cannot find the network settings of my computer’s wireless adapter ...25 My MAC address is not listed on the Select your N5 Wireless Adapter screen ...26 My network is not listed on the Connect to the network (automatic) screen ...26...
Page 5
I do not know the hexadecimal format of my WEP key ...27 Setup was not successful (My printer was not found on the network) ...27 The Lexmark printer software installation screen does not appear ...28 An error message appears ...28 My network printer does not appear in the list of available printers ...28...
The computer must be connected to the network, have TCP/IP active and running, and have one of the following operating systems: – – – – – Windows NT is compatible with Lexmark laser printers only. Windows 98 Windows Me Windows 2000 Windows XP Windows NT Introduction...
Software CD USB cable Continental European power plug adapter U.S. power plug adapter Power supply If any items are missing, contact Lexmark (page 38). Getting Started (this book) Australian/New Zealand power plug adapter United Kingdom/ Hong Kong power plug adapter...
Step 3: Prepare your printer Unpack and set up your printer. For help, refer to the instructions that came with your printer. To help configure your printer on the network: Do not connect your printer to your computer; however, if you have already done so, disconnect the USB or parallel cable.
Step 4: Raise the printer adapter antenna Note: Rotate the antenna clockwise from the back. Setup Step 5: Antenna Note: Connect your printer adapter to your printer USB cable Your printer may look different from the one shown.
Step 6: Connect your printer adapter power supply Power supply If necessary, replace the power plug adapter with the correct power plug adapter for your geography. Step 7: Power plug adapter If, after 30 seconds, one or more of the indicator lights are not on, see page 24.
Turn on your computer Windows 98 Windows Me Windows 2000 Windows XP Windows NT* Windows NT is compatible with Lexmark laser printers only. Setup Step 9: Set up your printer adapter on the network Your printer adapter must establish communication with either...
Page 12
When the following screen appears, click Next. Select Lexmark N5 Wireless Adapter and the type of printer to which you connected the printer adapter. Click Continue. Select First time N5 wireless adapter installation. Note: Your screen may look different from the one shown.
Page 13
Start from the Start Panel menu. Do not exit the Lexmark N5 Wireless Printer Adapter Setup Utility. You need to have both utilities open at this time. Use the space below to write down the original values of the network settings.
Page 14
After all values have been changed, apply the changes, and then close the computer’s wireless adapter configuration utility. Return to the Lexmark N5 Wireless Printer Adapter Setup Utility and click Continue. If there is only one printer adapter on your network,...
Page 15
Click Continue. Select the network to which you want to connect your printer. Note: If the network to which you want to connect your printer is the same network to which your computer was connected, it may help you to refer to the values you wrote down in step Note: If your network is not listed, click Refresh...
Page 16
After all values have been restored, apply the changes, and then close the computer’s wireless adapter configuration utility. Return to the Lexmark N5 Wireless Printer Adapter Setup Utility and click Continue. You are finished setting up your printer adapter on the network.
“Troubleshooting” on page 24. Printer software Procedure previously installed? Inkjet 1 Inkjet 2 Setup Inkjet 1 (software not previously installed) Insert the printer software CD. When the Lexmark printer software installation screen appears, click Install Now. Page...
Page 18
From the Results: No Printer Attached screen, click Network. Note: If the Results: No Printer Attached screen does not appear, continue with step on page 14. From the Network Configuration screen, select your network printer from the list of available printers. Your network printer is the one whose MAC address matches the...
Page 19
Install another copy of the driver only if you plan to print to multiple printers of the same model. For example, you might have a Lexmark Z65 locally attached and another Lexmark Z65 on your network. If you choose to install another copy of the driver, make sure you change your printer selection whenever you want to print to the network printer.
Page 20
From the Advanced window, click Networking. From the Networking Options screen, click Configure. On the Network Configuration screen, find your network printer in the list of available printers. Your network printer is the one whose MAC address matches the MAC address on the bottom cover of your printer adapter.
Page 21
“Manually configure the network printer” on page 34, and then continue with step Click Close. From the Networking Options screen, click Cancel. Exit the Lexmark Solution Center. Setup Select the network printer port. Windows 98/Me/2000 From the Start menu, click Settings Right-click the icon for your network printer.
Install another copy of the driver only if you plan to print to multiple printers of the same model. For example, you might have a Lexmark Z65 locally attached and another Lexmark Z65 on your network. If you choose to install another copy of the driver, make sure you change your printer selection whenever you want to print to the network printer.
Page 23
Setting up other computers on your network Insert the Lexmark Printer Adapter Installation Software CD.
Page 24
When the software installation screen appears, click Install Now. Click Next on the InstallShield Wizard screen. Select Lexmark N5 Wireless Adapter and Laser. Click Continue. Select Additional PC installation. Note: Your screen may look different from the one shown. Verify that your computer’s wireless adapter is on the same network as your printer adapter, and then click Continue.
Page 25
Setup Setting up other computers on your network Insert the Lexmark Printer Adapter Installation Software CD. Printers. When the software installation screen appears, click Install Now.
Page 26
Select Lexmark N5 Wireless Adapter and Laser. Click Continue. Select Additional PC installation. Note: Your screen may look different from the one shown. Verify that your computer’s wireless adapter is on the same network as your printer adapter, and then click Continue.
Page 27
Setup Setting up other computers on your network Printers Insert the Lexmark Printer Adapter Installation Software CD. When the software installation screen appears, click Install Now. Click Next on the InstallShield Wizard screen.
Page 28
Select Lexmark N5 Wireless Adapter and Laser. Click Continue. Select Additional PC installation. Note: Your screen may look different from the one shown. Verify that your computer’s wireless adapter is on the same network as your printer adapter, and then click Continue.
I cannot find the network settings of my computer’s wireless adapter My MAC address is not listed on the Select your N5 Wireless Adapter screen My network is not listed on the Connect to the network...
The Lexmark Printer Adapter Installation Software screen does not appear Close all open software applications. Restart your computer. Reinsert the Lexmark Printer Adapter Installation Software CD. If the software installation screen appears, continue with step on page 6. If not, continue with the following steps: From your desktop, double-click My Computer.
My MAC address is not listed on the Select your N5 Wireless Adapter screen • Click Search Again. • Verify that all three printer adapter lights are on. • If you manually entered the SSID, verify the value LexmarkN5 was entered correctly. The SSID is case- sensitive, and there should be no extraneous spaces.
I do not know the hexadecimal format of my WEP key • Go to another device on your network and note the selections for key and number of bits. • 40/64 bit keys contain five alphanumeric characters (0 through 9, A through F) and 128 bit keys contain ten. •...
The Lexmark printer software installation screen does not appear Close all open software applications. Restart your computer. Reinsert the printer software CD. If the software installation screen appears, continue with step on page 13. If not, continue with the following steps: From your desktop, double-click My Computer.
There is not a Network button on the Results: No Printer Attached screen From the Search Results: No Printer Attached screen, click Select. From the Printer Installation screen, click Configure Network Printer. Continue with step on page 13. There is not an Install Selected Printer button on the Network Configuration screen From the Network Configuration screen, click Close.
My network printer does not print • Make sure all cables to the printer, printer adapter, electrical outlet and network connection are secure (pages 4 through 5). • Make sure all indicator lights are on (page 5). • Check the printer status (page 37). •...
Change the computer’s network settings Change the printer adapter network settings Print a test page Uninstall the printer software Uninstall the Lexmark Printer Adapter Installation Software Manually configure the network printer Select the network printer port Check the printer status...
Reset your wireless adapter screen and the Reset your computer’s wireless adapter screen. How Do I...? Select the printer adapter for which you want to change the settings. Lexmark Make sure the MAC address you select matches the MAC address on the bottom cover of your printer adapter.
Uninstall the printer software Inkjet printers From the Start menu, click Programs or All Programs the name of your Lexmark printer Lexmark Uninstall. Follow the instructions on your screen. To reinstall the printer software, restart your computer, and then follow the instructions on page 12.
Uninstall the Lexmark Printer Adapter Installation Software From the Start menu, click Programs or All Programs Lexmark Printer Adapter Uninstall Lexmark Printer Adapter. Follow the instructions on your screen. Manually configure the network printer Your printer software automatically configures your network printer.
MAC address on the bottom cover of your printer adapter. MAC address Note: If you want to print to a network printer on a remote subnet, click Add Printer and follow the instructions on your screen. Click Refresh. Lexmark How Do I...?
Click Configure. Enter an IP address that is valid for your network. For help, refer to your network documentation or contact your network administrator. Click OK. Click Close. Select the network printer port. For help, see page 36. How Do I...? Select the network printer port Follow the instructions for your operating system.
Windows XP From the Start menu, click Control Panel and Other Hardware View installed printers or fax printers. Right-click the icon for your network printer. Make sure Use Printer Offline is not selected, and then click Properties. From the Ports tab, select the printer port that consists of the printer name followed by the last six characters of the printer adapter MAC address (for example, Lexmark_E320_0035D0).
• Register your printer adapter. Other ways to contact our Customer Support Center: • If you have an inkjet printer, from the Lexmark Solution Center, click Contact Information • If you have an inkjet printer, insert the printer software CD that came with your printer, and then click Contact Lexmark Customer Support.
Infrastructure) that your network devices are operating in. Also, one of your computer’s wireless adapter network settings. network-capable printer. A Lexmark printing device that does not need to be locally attached to a computer. When connected to a network it can be accessed by any computer on the same network.
Page 45
printer port. Windows terminology for a physical or logical connection to a printer. For example: • LPT1 indicates the printer is attached to a physical parallel port with a parallel cable. • USB001 indicates the printer is attached to a physical USB port with a USB cable.
Page 46
LOST SAVINGS, INCIDENTAL DAMAGE, OR OTHER ECONOMIC OR CONSEQUENTIAL DAMAGES. This is true even if you advise Lexmark or a Remarketer of the possibility of such damages. Lexmark is not liable for any claim by you based on a third party claim.