My Network Printer Does Not Print - Lexmark N5 Getting Started

My network printer does not print

• Make sure all cables to the printer, adapter, electrical
outlet and network connection are secure (pages 4
through 5).
• Make sure all indicator lights are on (page 5).
• Check the printer status (page 30).
• Make sure the network is operating properly.
Refer to your network documentation or contact your
network administrator.
• Make sure the printer software is installed on the
computer you are sending the print job from (page 11
(inkjet) or page 16 (laser)).
Note: You must install the printer software on each
computer that uses the network printer.
• Make sure your network printer has been assigned an
IP address.
– If your adapter is connected to an inkjet printer,
check the Network Configuration screen to
verify an IP address is listed. For help
accessing the Network Configuration screen,
follow steps 1 through 4 on pages 13 and 14.
If there is not an IP address listed for your
network printer, see
network printer
Getting Started
Manually configure the
on page 28.
– If your adapter is connected to a laser printer,
run the Laser Configuration Utility on the
Lexmark Printer Adapter software CD that
shipped with your adapter. For help, see
printers
• Make sure you have selected the correct printer port
for the network printer. For help selecting the network
printer port, see page 30.
• Restart the computer.
• Make sure there is not a problem with the printer
itself.
a Disconnect the printer from the adapter.
b Attach the printer directly to your computer
with a USB or parallel cable.
If you are able to print when the printer is directly
attached, there may be a problem with your network.
Refer to your network documentation or contact your
network administrator.
• Uninstall and then reinstall the printer software.
(page 27)
If the printer still does not print, refer to your printer
documentation for help.
26
Lexmark confidential until announced
on page 29.
Laser