Lexmark N5 Getting Started page 13

Follow the instructions on your screen to change
7
the values of your computer's wireless adapter
network settings.
Do not exit the Lexmark Printer Adapter software.
You need to have both utilities active at this time.
Use the space below to write down the current
8
values of the network settings. You may need to
refer to them later.
SSID/Network name __________________
Mode ______________________________
Channel ____________________________
WEP/Authentication __________________
Key________________________________
Getting Started
Return to the Lexmark Printer Adapter software
9
after all settings have been changed and the
configuration utility for your computer's wireless
adapter has been closed.
If there is only one printer adapter on your
10
network, continue with step 12 on page 9.
If there are two or more printer adapters on your
network, select your adapter from the list of
available network devices.
Your adapter is the
device whose MAC
address matches the
MAC address on the
bottom cover of your
adapter.
8
Lexmark confidential until announced
MAC address