Verify that an IP address is listed for your network
6
printer.
Note:
If there is not an IP address listed or your
network printer is <Unconfigured>, see
Manually configure the network
printer
on page 28, and then continue
with step 7.
7
Click Close.
From the Networking Options screen, click
8
Cancel.
9
Exit the Lexmark Solution Center.
10
Select the network printer port.
Windows 98/Me/2000
a From the Start menu, click
Settings
Printers.
b Right-click the icon for your network printer.
c Make sure Set as Default is selected and
Use Printer Offline is not selected, and then
click Properties.
d Click the Details or Port tab.
e From the Print to the following port: menu,
select the printer port that consists of the
printer name followed by the last six
characters of the adapter MAC address (for
example, Lexmark_Z65_1008e8).
f
Click OK.
Windows XP
a From the Start menu, click Control Panel
Printers and Other Hardware
Faxes.
b Click the Ports tab.
c From the list of ports, select the one that
consists of the printer name followed by the
last six characters of the adapter MAC
address (for example,
Lexmark_Z65_1008e8).
d Click Apply.
e Click OK.
You are finished setting up your computer to work with your
network inkjet printer; however, the printer software must be
installed on each computer that uses the network printer.
15
Lexmark confidential until announced
Printers and
Getting Started