Lexmark N5 Getting Started page 8

Step 3:
Prepare your printer
Unpack and set up your printer. For help, refer
1
to the instructions that came with your printer.
To help configure your printer on the network:
2
– Do not connect your printer to your
computer; however, if you have already done
so, disconnect the USB or parallel cable.
– Do not install the printer software; however, if
you have already done so, you do not need
to uninstall it.
Place the printer next to your adapter.
3
Note: If necessary, disconnect the printer
power supply, and then reconnect it at its
new location.
Make sure the printer power light is on.
4
Note: Your printer may look different from the
one shown.
3
Getting Started