Troubleshooting - Jonsered FR 2312 MA Operator's Manual

Troubleshooting schedule
If you cannot find a solution to your problems in this
owner's manual, speak to your Jonsered service agent.
Problem
The starter motor does not turn
the engine over
The engine does not start when
the start motor turns the engine
over
The engine does not run smooth-
ly
The engine apparently has no
power
The battery does not charge
There is vibration in the product
24

Troubleshooting

Cause
The parking brake is not applied. See
page 16 .
The lift lever for the cutting deck is in mow position. See
ting deck on page 13 .
The main fuse is blown. See
The ignition lock is defective.
The connection between the cable and the battery is bad. See
battery on page 21 .
The battery is too weak. See
The starter motor is defective.
There is no fuel in the fuel tank. See
The spark plug is defective.
The ignition cable is defective.
There is dirt in the carburettor or fuel line.
The spark plug is defective.
The carburettor is incorrectly set.
The air filter is clogged. See
The fuel tank vent is blocked.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly ad-
justed
The air filter is clogged. See
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle control is set to choke position or the throttle wire is incorrectly ad-
justed
The battery is defective. See
The connection at the cable connectors on the battery terminals is bad. See
charge the battery on page 21 .
The blades are loose. See
One or more of the blades are unbalanced. See
22 .
The engine is loose.
To apply and release the parking brake on
To replace the main fuse on page 21 .
To charge the battery on page 21 .
To fill fuel on page 12 .
To replace the air filter on page 19 .
To replace the air filter on page 19 .
Battery safety on page 10 .
To examine the blades on page 22 .
To examine the blades on page
To lift and lower the cut-
To charge the
To
512 - 001 - 26.01.2018