Table of Contents
Advertisement
SAFETY PRECAUTIONS
TO PREVENT ANY RISK OF ELECTRIC SHOCK OR FIRE, READ THIS MANUAL
CAREFULLY BEFORE INSTALLING THE EQUIPMENT.
This equipment is not designed for use by people (including children) with diminished
physical, sensory or mental capacities, or people without experience or knowledge of
such equipment, unless they have received prior instruction in the use of the equipment
from a person responsible for their safety or are under the supervision of such a person.
Ensure that children are supervised in order to prevent them playing with the device.
Warning: This equipment contains components that may cause electric arcs or sparks,
when connecting cables. To prevent any risk of fire or explosion, do not install this
equipment close to flammable materials, liquids or gases.
Installation precautions
To prevent any risk of irreversible damage to the equipment, ensure that you comply
with the following recommendations.
•
This device must not be installed close to a heat source or any
flammable liquids or gases such as a gas engine room.
•
It must not be installed in an airtight or poorly-ventilated
compartment.
•
The ventilation inlets must not be obstructed.
•
Clearance of at least 4" (10 cm) must be allowed around the housing to
guarantee adequate circulation.
•
This device must not be exposed to running water, water spray and dust of any
kind.
•
We recommend securing the device in a vertical position, with the cable outlet
pointing downwards.
•
You are prohibited from making mechanical alterations to the housing,
including making additional holes, for example.
Connection Precautions
To prevent any risk of electric shock or irreversible damage to the equipment,
you should comply strictly with the following recommendations.
•
The installation to which this device is connected must comply with any
applicable regulations such as ABYC.
•
This device is designed to be connected to 220-240V 50/60Hz or 100-
120V 60Hz single phase circuits. 115V / 230V selection is automatic.
220-240V only for 24V, 80A, 100A version.
•
The main power line must utilize a circuit breaker, to Protect individuals
against electric shocks. Refer to the device's electrical specifications to select
the size and type of circuit breaker.
Prior to main power connection, the cable gland in the packaging must be assembled and
3
Advertisement
Table of Contents
