Table of Contents
Advertisement
DC CABLES AND FUSES
DC wiring
Check the quality of connections and Proper tightening of connections.
Battery cables must be as direct and short as possible.
Each battery output can Provide the charger's full amperage and all the cables
must have identical cross-sections. Ensure that you comply with the following
recommended cross-sections.
Charger
capacity
12V 60A
12V 90A
24V 40A
24V 60A
24V 100A
These chargers are equipped with airtight grommets with
"automatic" opening.
Simply pressing the center section of the membrane is sufficient to allow
the cable to pass through the grommet.
Length < 2m (6ft)
25mm2 / AWG3
35mm2 / AWG2
16mm2 / AWG5
25mm2 / AWG3
35mm2 / AWG2
Length between 3
and 5m (10 to 16ft)
35mm2 / AWG2
50mm2 / AWG0-1
20mm2 / AWG4
35mm2 / AWG2
50mm2 / AWG0-1
11
Advertisement
Table of Contents
