Sentry Voyager 12V 60A Installation & Operation Manual page 8

Marking
L1
N/L2
PE (Ground)
-DC
+ DC1
+ DC2
+ DC3
CHARGE
SELECT
BATTERY FUSES
EXT COM 1
EXT COM 2
INT CoM
TEMP SENSOR
RELAY
Description
AC main, 8 AWG (10mm2) max (wire color code: brown or
black)
AC neutral or L2, 8 AWG (10mm2) max (wire color code: blue,
white or red)
AC ground, 8 AWG (10mm2) max (wire color code: green &
yellow or green)
Battery negative (common), pin M8 (wire color code: black)
Main battery positive, pin M8 (wire code: red)
Auxiliary battery 2 positive, pin M8 (wire color code: red)
Auxiliary battery 3 positive, pin M8 (wire color code: red)
Charge curve and battery charging mode selector, 10 positions
(from 0 to 9) (refer to curve settings p14)
Battery Protection fuses (on the –DC supply)
External communication bus (CAN bus)
(for an external digital display or communication between
chargers)
External communication bus (CAN bus)
(for an external digital display or communication between
chargers)
Communication bus for a digital display built into the charger
Battery temperature sensor (2 non-polarized wires, no
polarity)
Connect to the positive terminal of the main battery
Dry alarm contact
8