Table of Contents
Advertisement
The performance and usable life of batteries are thereby maximized.
By virtue of fully automated charging cycles, the batteries are protected against
surges, providing a permanent connection for the charger.
Selection of the charging Program takes place on installation using the
"CHARGE SELECT" dial on the charger board.
The position of the arrow indicates the number of the Program selected (e.g.:
Program No. 1 in the photograph above). Selection is made using a small flat-
head screwdriver.
CAUTION
It is important to note that the use of an inappropriate charging cycle for
the battery technology may extensively impair or even damage the
latter.
This is particularly true for cycles where charge voltages are higher than the
levels recommended by the battery manufacturers.
A serious risk of overheating the batteries and releasing gases that are
harmful to users' health.
Curve no. 9 is compatible with a LiFeSo4 battery, provided that the battery is
equipped with BMS-type battery Protection (Battery Management System)
within the actual battery. In this case, refer to the battery manufacturer's
recommendations for the choice of charging cycle.
13
Advertisement
Table of Contents
