Table of Contents
Advertisement
Curve no. 9 is compatible with a LiFeSo4 battery provided that the battery is equipped
with BMS-type battery Protection (Battery Management System) within the actual
battery. In this case, refer to the battery manufacturer's recommendations for the
choice of charging cycle.
GENERAL INSTRUCTIONS
Maintenance precautions
To prevent any risk of electric shock during maintenance operations, ensure that the
following recommendations are studied carefully before performing any maintenance
on the device:
•
All maintenance operations must only be carried out by a suitably
qualified technician.
•
In the event of damage to the main power and/or batteries, these may only be
replaced by a qualified person, to avoid any danger.
•
The main power supply must be disconnected (cable or
switch).
•
The -DC or -BAT supply on the battery must also be disconnected to prevent
any transfer of power.
•
To allow the high voltage capacitors to discharge (on the circuit board), wait
for 5 minutes before carrying out any work inside the housing.
•
The fuses must be replaced by fuses with strictly identical characteristics and
performance levels.
Model Number
The model number can be determined by the following code:
SVE = Sentry Voyager Elite series
12 or 24 = DC Voltage Output
20, 40, 60... = DC Amp Output
/3 = 3 battery banks
X = 115/230vac or C = 230vac only
J = 50/60 Hz
CONTENTS OF THE BOX
RECEIPT OF THE PRODUCT
Contents of the packaging
The charger.
The user manual.
The main power cable gland and mounting nut (to be installed
5
Advertisement
Table of Contents
