Table of Contents
Advertisement
8 Web Page Reference
8.3.1.6
Restore Configuration File
The configuration file can also be used when swapping out a faulty wireless unit. If one of the
wireless units is replaced on a wireless link a configuration file captured from the faulty unit
can be uploaded into the new unit to speed up replacement. It should be noted that when
placing a configuration file into a wireless unit with a different MAC Address the license key
will not be restored and may need to be entered. This can be obtained either from the Quick
Start Guide supplied with the replacement wireless unit or directly from Motorola. Note that
the target MAC address at the other end needs to be changed to ensure that it is using the
MAC address of the replaced unit.
The restoration of configuration files can be performed using the Restore configuration tool.
Using the browser button to locate the configuration file you wish to restore then click the
'Restore Configuration File and Reboot' button (Figure 39). The user will then be prompted to
confirm the action (Figure 40)
Figure 39 - Restore Configuration File Pop Up Screen
97
Advertisement
Table of Contents
