Table of Contents
Advertisement
8.3.4
Install Pages
These pages are used during system installation. There follows a description of the install
pages along with their use during the installation configuration process. The actual installation
process is described in Section 8.3.4.1 "Manually Configuring The Wireless Units".
All wireless links are shipped as paired units. They are pre-configured at the factory so that
they can be installed without the user supplying any configuration. Each wireless link is
shipped with a quick start guide. Attached to the quick start guide is a summary of the pre-
configured configuration data. Table 18 shows a sample link configuration. The values
type
have been committed to the wireless unit's non-volatile storage.
Example PTP 500 Series Configuration Data
For your convenience these two units have been pre-configured as link Units.
Units:
ODU serial number
0167100000A0
Ethernet MAC address
00:04:56:10:00:96
Configured as:
Master
Target MAC address
00:04:56:20:00:05
License Key
9eb8-c807-396c-7c3f-2819-393e-1f48-e46f
IP Address
169.254.1.2
Table 18 – 500 Series Bridge Factory Configuration Values
ODU serial number
016710000096
Ethernet MAC address
00:04:56:10:00:A0
Slave
Target MAC address
00:04:56:20:00:0D
License Key
c49a-e2ac-9ca7-3925-e4e2-a8cc-120d-2f5e
IP Address
169.254.1.1
104
8 Web Page Reference
in red
Advertisement
Table of Contents
