Encryption Mode And Key; Figure 124 - Aes Configuration Data Entry Page - Motorola PTP 58500 User Manual

15.1.2 Encryption Mode and Key

Entering the license keys only does not initialize AES link encryption. Link encryption can only
be enabled via the Configuration or Installation Wizard pages. Motorola recommends that the
Configuration page Figure 124 be used to configure AES link encryption.
Motorola recommends the following process for entering AES link encryption configuration:
1. Open two browsers, one for each end of the link
2. Navigate to the 'Configuration' data entry page for each end of the link
3. At both ends of the link select the 'AES (Rijndael)' Encryption Algorithm required.
Figure 124 – AES Configuration Data Entry Page
15 AES Encryption Upgrade
196