Attaching The Upper Handle Bar To The Lower Handle - ALDI 59085 User Manual

Assembly
Attaching the Lower Handles continued.
1. Once the handles are set up as shown in Fig A,
remove the 2 x lower handle locking knobs
( + bolt/s, curved washers & circle washers) (11)
from your accessory bag (Fig B). Place the lower
handle in position to assemble by aligning the
2 x lower handle ends on the outer side of the
lower handle mounting plates (12).
2. Once in position, insert the bolt on each side
through the lower handle mounting plate (12)
from the inside of the mounting plate (12)
through to the outside of the lower handle (9)
(Fig C).
NOTE: You may need to support the lower
handle to engage the bolt through as shown
in Fig C on the left.
3. Once the bolts are loosely in position, fit the
plastic curved washer over the end of the bolt,
then the circle washer (Fig D), then screw the
lower handle locking knob (11) over the circle
washer and secure by turning clockwise until
tight and secure (Fig E).
22
e-mail: help@powertoolsupport.com
MODEL No.: DM46E3P-D173 • 02/2018 • 59085
173cc 4 Stroke Petrol Lawn Mower
B.
(X2)
C.
D.
E.
AFTER SALES SUPPORT
1800 909 909
(toll free)
173cc 4 Stroke Petrol Lawn Mower
Attaching the Upper Handle Bar
to the Lower Handle
With the lower handle (9) in position, the upper
handle bar (1) can now be secured in position.
IMPORTANT: Again ensure the cable is not
tangled or crossing over before applying the
upper handle bar (1).
1. Remove the 2 x upper handle locking levers
( + curved washer/s , circle washers & locking
knobs) (10) from your accessory bag (Fig F).
2. Align the ends of the upper handle bar (1) on
the external side of the lower handle (9) such
that the holes in the ends of the upper handle
bar (1) align with the holes in the top of the
lower handle (9).
3. Insert the upper handle locking lever (10) bolt
through the upper handle bar (1), then through
the lower handle (9). When in position repeat
on the opposite side to keep the upper handle
bar (1) sturdy in position (Fig G).
4. Apply the curved washer, circle washer and
locking knob on the internal side of the lower
handles (9), push the locking lever down
towards the handle bar, then tighten the
locking knob until secure (Fig H).
NOTE: Tension on the upper handle locking
lever/s (10) can be adjusted by rotating the
lever knob (Fig I).
NOTE: Repeat Step 4 EACH time the lawn
mower is operated to make sure tension
remains stable on the handles / knobs / levers,
ensuring they do not become loose due to
vibration.
AFTER SALES SUPPORT
1800 909 909
(toll free)
Assembly
F.
(X2)
G.
H.
I.
e-mail: help@powertoolsupport.com
MODEL No.: DM46E3P-D173 • 02/2018 • 59085
23