Integra DRX-R1.1 Basic Manual page 24

> Before Start > Part Names > Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
9. Connect Other Cables
Antenna Hookup
(North American (Australian models)
models)
Move the antenna around while playing the radio to find the
position with the best reception. Use a thumb tack or similar
to attach the indoor FM antenna to a wall.
Network Hookup
a
a a
Connect this unit to the network using wired LAN. You can
enjoy network features such as internet radio by connecting
the unit to the network. Connect with an Ethernet cable to
the ETHERNET port as shown in the illustration.
Power Cord Hookup
d
This unit includes a removable power cord. Connect the
power cord to the power outlet after completing all other
connections. Connect the power cord to AC INLET of the
unit and then connect to the outlet. Always disconnect the
outlet side first when disconnecting the power cord.
c
b
1
a Indoor FM Antenna, b AM Loop Antenna, c Ethernet Cable, d Power Cord
24