Sfp Installation In Sfp Media Module - Siemens SCALANCE XR324-4M EEC Operating Instructions Manual

4.3.2

SFP installation in SFP media module

NOTICE
Use only approved SFPs
If you use SFPs that are not approved by Siemens AG, there is no guarantee that the
device will function according to the specification.
If you use unapproved SFPs, this can lead to the following problems:
• Damage to the device
• Loss of the approvals
• Violation of the EMC regulations
Use only approved SFPs.
You can insert or remove the SFP during ongoing operation.
Inserting an SFP
Note
Only the media module MM992-2SFP may be fitted with approved SFPs. The SFP media
module can be fitted with up to two SFPs.
Device:
Media module
MM992-2SFP
(SFP media module)
SCALANCE XR-300M EEC
Operating Instructions, 11/2015, A5E02661176-09
Variant [Order number]
Labeling on the device
2 x 100/1000 Mbps [6GK5 992-2AS00-8AA0]
9922AS
4.3 Installation of modular devices
Figure
Assembling
31